Sunday, June 15, 2014

Linky resources: Far Far Hill

Today, I'm going to share with you the Far Far Hill website. I chanced upon it while doing a google search of digital stamps. Did you know that there is a huge collection of free digital resources that are available on the internet! To get started, you can do a google search on "free digital stamps" or "free digital backgrounds" or "free digital images" to get you started

So, what's over at Far Far Hill? There are lots of free digital backgrounds, labels and images. Most of the freebies are vintage themed so if you like to have vintage elements in your projects, this is a good resource. And the best thing is that they have no time period - this means that you can look through all their archives and these things will still be available for downloading! Do take note of their terms of use though, these free digital resources are for personal use only.

I will be posting more of these resource links in the future. These will be labelled "linky resources". I love how blogger keep tracks of all the labels you have labelled before so you don't run the risk of losing things just because you misspelled a word or forgot a spacing.

Saturday, June 14, 2014

Using your handmade masks - tips and tricks

Well hello there, as promised, a follow up post to the last tutorial I did on making your own masks! Took a bit longer to post this as usual as I haven't had much time to really sit in front of the computer but here it is! (Better late than never right ;))

There will be 3 tips for you today: choosing the right media, keeping your masks in the same spot, and cleaning up.

Choosing the right media
In the last post I mentioned that you would probably want to use a media that has minimal water content. Here's why: remember that these masks are made from paper that are covered with waterproof clear tape on the top; this means that the side edges of the masks are left uncovered by clear tape. So if you were to use a media with high water content such as ink sprays, the water from the media will seep under the clear tape, wicked in through the paper. This will weaken the masks, even if they were to dry out eventually.

So a short idea of what you should and should not use:
Yes - acrylic paint, colour pencils, pastel, crayons
No - watercolours, ink sprays

So what if you really have to use media with high water content. I have 2 ideas for you. The first to coat it with a layer of acrylic paint first, making sure to cover up all the exposed paper of the mask. Once it dries, acrylic paint is not rewetable and so will not stain any future projects. The second is to coat it with a layer of PVA glue or Mod Podge (note: Mod Podge stays a little tacky after it dries). Like the acrylic paint, glue is not rewetable after it dries and so will not stick to your future projects. Both methods will be fine, considering that the medium in acrylic paint is actually glue. It just depends on whether you prefer a clear finish with the glue, or opaque coloured finish with the acrylic paint.

Keeping your masks at the same spot
When using your masks, you would want them to stay at the same spot while working with it. You could use your hands to keep them fixed to the surface, but that might be difficult to achieve especially if the mask is pretty large. What you can do is to stick a rolled up low tack tape to the bottom side of the mask while you are working with it. Some examples of such tape would be masking tape, washi tape, removable tape, magic tape and painter's tape. You would want to test the tape out before adhering to your project, to check that the tape can be removed cleanly from the material you are working on.

Cleaning up
So you are now done with using your stencils and want to make sure that your mask is clean for the next use. Are you going to reach for your trusty baby wipes to clean it up? Well here's the thing, baby wipes is a definite no no for your handmade stencils!

As with the case of using high water content media, baby wipes are wet and hence content water. Using them will only cause water to seep into your masks. So what to do? If you are using dry media well hey, there's nothing to clean up right? For acrylic paints, I strongly recommend that you just leave it on your masks to dry - it makes your masks stronger and sturdier and saves you the effort to clean up. That's just killing 2 birds with one stone ;)

If you are using the high water content media after taking the step to waterproof your whole mask, then reach for your baby wipes and clean it. Leaving them on your masks will stain your next project once they are wetted again, and I'm sure you won't want that.

Well folks, that is it for the tips I have for you today. Let me know what you think and hope you have fun with your masks!

Sunday, June 1, 2014

Making your own masks

I spent yesterday making my own masks so I'm going to share with you how I go about doing that. Be sure to read till the end for some tips and tricks in getting the masks you want!


To make your own masks you'll need: 
  • Clear tape e.g. packaging tape or scotch tape -- the larger the width, the faster the project will go and the easier time you will have. 
  • Images to form your mask. You can use images from magazine pages (like this) or newspapers and even hand drawn images. I tend to collect them and make all of them at one go. 
  • Cutting materials such as scissors and craft knife
  • A non stick surface. Here's I'm using a large foam sheet but you can do this on your table, floor, whatever. You want something that will make it easy to remove your clear tape. Experiment with your tape before settling down somewhere. 

Steps to making your own masks: 

1. Lay the image you want to cut out as a mask on your non stick surface. Here, I am laying it landscape as I prefer to work with my tape down the length of the image. That way, I will work with less but longer strips of tape

2. Estimate a length of the tape you will need to cover one horizontal section of the image and cut that out. For the first strip of tape, I like to stick the tape to the surface so that it will hold the paper to my surface, allowing me to focus on laying the tape down and prevent any tape disaster (you know, the one when the tape sticks to the tape or even worse, when it veer off course and stick crookedly).

3. To prevent the tape disaster, lay the tape onto the image from one end to the other, smoothing out the surface so that the image will lie flat and parallel to the tape.

4. Continue to lay the tape down strip by strip, making sure to cover all parts of the image with some border surrounding it. You would want to make sure the strips overlap so that no parts of the image is left uncovered. You should now have something like the picture below.

 5. Now, flip the image over and do the same thing, laying down tape to cover the back part of the image. To check if you have fully covered the back part of the image, hold it up against the light. You should be able to see the silhouette of your image like in the picture below.

6. When both sides of the image are fully covered, you are ready to start cutting it out. I like to use a pair of scissors to cut the outline and craft knife for holes within the image.

If you accidentally cut off or cut into a part of the image, do not worry because this can be easily fixed. You can just cut a piece of tape big enough to cover up the whole area and then cut off the excess tape.

Here I accidentally cut into the legs of the ballerina. 

So I laid tape over it on both sides and trim along the correct edge of the ballerina.

7. After cutting out the image, you mask is ready for use! Test out your mask to see if you like the look of the masked out shape. If there are any modifications you like to make, you can trim off more parts of the image. To add to the image, use the same trick mentioned above with clear tape to correct the image.

The first print is the one on the left. I didn't like the hole under her hands and how her legs looked so I made some modifications and made the second print on the right.

Some tips and tricks when you're making your own mask: 

  • When you first start to do this, pick images with well defined edges. The ballerina I chose here have some edges that are hard to see due to the shadows which was why I made the mistake of cutting into her legs. Once you are more comfortable with the technique you can then expand your image selections. 
  • If you like your masks to be more sturdy and less flimsy, you may want to lay down more then one layer of tape on each side to make it thicker. 
  • When cutting out your image, I find that it is easier to feed the paper into your scissors and/or craft knife knife. Turn your paper rather than the angle of your hand. 
  • When testing out your masks, I suggest using acrylic paint or any kind of dry media. You want to avoid using any water-based media. More about this in the next post! 

And that is all! Thank you for reading and supporting my first ever tutorial. It was difficult and tiring editing all the photos to include "My Craft Diary" at the corner but I really like how it turns out. Be sure to check back for the next post! 

Friday, May 30, 2014

Taking one step at a time

I experimented with creating pages today and got my first page up! It's right up there in the navigation bar above and you can click on the about me section. It's still work in progress and as time passes more tabs will go up the navigation bar as well as updates to the pages.

I starting to feel the mojo for this blog which is good and for now I'll try to post/do something everyday to get me where I want to get with this blog though that will probably take a long while; I'm not expecting my blog to look how I envision it overnight. So it's taking one (small) step at a time but we will get there!

"The key to getting things done is to start"

Thursday, May 29, 2014

Blog hop at Dina Wakley's blog

Did a little blog hop today at Dina Wakley's blog and was scrolling through some of her blog posts. So I saw a couple of videos that she posted which completely wowed me and got me very appreciative of her creative mind and talents (my recent impressions of her has always been her talking about or demo-ing her new supply line with Ranger).

So here's one video from her that I will share with you today, a video of her going through her technique in doing creative warm ups. Wondering what that is all about? Watch her video now and find out! She also has a couple more videos on the site if you want to see more of her videos.

Monday, May 26, 2014

Colouring with permanent markers

I was doing a little project of adding card labels into my photo albums and was using a new set of permanent markers that I have bought to write, draw and decorate my labels. While using the markers I found something surprising - the ink from the markers actually make it nice to colour things!

The inks evaporates a short while after getting onto the paper so it is easy to blend them and they don't leave streaks behind that shows which section of the colouring is overlapped the most. Most importantly, they will not rub away the surface of the paper if you go over it too much! This is my first time experimenting with coloured permanent markers; previously I have only used water-based markers which do not give good results for colouring - they leave streaks and uneven colour, plus also rub away the paper if you work on it too much.

So in some ways, the permanent markers are able to act like alcohol based markers, they contain alcohol too, which I could smell when I'm using them, though not that strong to give me a headache. If you are sensitive to the fumes from permanent markers, I suggest that you don't work too close to the paper and the marker tips and work in a well ventilated room. Don't work with them for too long too and stay safe!

I used the Bic Marking ( permanent markers if you are interested in which markers I used. But any alcohol based permanent markers should work well, and they are much less expensive then craft store alcohol markers such as the Copics and Promarkers. Experiment a bit with what you already have at home!

Sunday, May 25, 2014

A new start and new beginning

It's the first ever blog post for this blog! I decided to start one after thinking about it for a while. I guess I want to share more about my crafty journeys and inspirations and ideas with other people. And also crafting within my limits and budget. That means using materials that can be more or less easily found near me (i.e. in my country, Singapore) and something that is more suitable for the culture here. And since I've been thinking about this for a while, I guess the first step to getting anything done is to start. So, here we are!

I'll admit I'm not too much of a blogger. I'm not even much of a computer person. I'm a young person, mind you, but I just don't like the idea of using the computer too much or slaving to my computer. It's just.. so wrong to me. But that's my choice and belief. And off we go!